EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is a highly productive photo voltaic controller designed for off-grid photo voltaic programs. According to multiphase synchronous rectification technology, it assures optimized Strength conversion and program stability for a wide range of photovoltaic (PV) purposes.
Essential Functions of the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Photo voltaic Charge Controller know-how for excellent solar Strength harvesting. Critical characteristics contain:
Multiphase Synchronous Rectification (MSR) for improved Electrical power conversion.
Superior MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Improved battery existence.
LCD Screen with true-time facts checking.
Multiple Load Command Modes together with handbook and timer.
In depth Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
one. Unboxing and Planning the Controller
Make sure all components are integrated: Tracer AN unit, temperature sensor, communication cables, and user manual.
Confirm the design range and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Cost Controller
Pick out a very well-ventilated, dry site near to the battery financial institution.
Safe the Tracer AN controller using the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the visit here Photo voltaic Cost Controller
Caution: Often follow right protection protocols and make sure the system is driven off ahead of connecting elements.
Step one: Link the battery terminals to the demand controller (constructive to positive, destructive to adverse).
Stage two: Connect the photo voltaic panel array into the PV input terminals.
Move 3: Connect the load terminals if utilizing a direct load relationship.
Phase 4: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electrical power over the controller by connecting the battery initial.
Make use of the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, mild Management.
5. Checking and Knowledge Logging
The Tracer AN Series supports actual-time monitoring utilizing the MT50 distant meter.
Info can be logged by means of the RS485 interaction port using software program such as Solar Station Laptop.
Remote monitoring is possible While using the EPEVER WiFi module.
6. Troubleshooting Prevalent Troubles
Problem one: No Power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Validate the solar array’s voltage ranking.
Alter system parameters if needed.
Concern 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT options during the menu.
Benefits of the Tracer AN Series with MSR Technologies
The multiphase synchronous rectification know-how assures:
Better Performance: Decreased Vitality losses all through conversion.
Enhanced Reliability: Secure overall performance underneath variable hundreds.
Lengthier Battery Daily life: Dependable and precise charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and increasing battery life. By subsequent the above mentioned setup information, users can guarantee optimum efficiency and technique longevity.